Inventory Index  >  Pumps  >  Positive Displacement Pumps  >  Tri Clover / Alfa Laval

Used 1991 Tri Clover PR10 Positive Displacement Pump. Model: PR10-11/2-UH4-SL-S. Maximum Capacity: 12 gpm @ 20 psi. Displacement per Revolution: .023 gal. Seal option: single, Carbon against Stainless Steel. [2] 3 inch rotors. Inlet: [1] 1-1/2 inch diameter ACME fitting. Outlet: [1] 1-1/2 inch diameter ACME fitting. Overall dimensions: 1 foot L x 6-3/4 inches W x 8-1/4 inches H.[ACN35a]. FAD
Stock No: fpe_DSLP529.8  |   Mfg: Tri Clover  |   Model: PR10-1-1/2-UH4-SL-S  |   S/N: fpe_Y6796

Used Tri Clover Positive Displacement Pump. Model: PRED60-3-UC4-SL-S. Serial Number: W2603. Inlets/outlets: [2] 3 inches ACME fittings. Overall dimensions: 1 feet 4-1/2 inches length x 1 feet width x 1 feet 2-1/2 inches height.
Stock No: fpe_32.15  |   Mfg: Tri Clover  |   Model: PRED60-3-UC4-SL-S  |   S/N: fpe_W2603

Tri Clover PRE 300 Positive Displacement Pump. Model: PRE300-4M-VC4-SL-S. S/N: V9813. Ports: 4 in. Tri-clamp fittings. Flow rate for a new pump is 300 gpm at max rpm of 500. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. Pump has mechanical seals. Drive can be changed to suit your application. Reliance motor: 10 hp, 1755 rpm, 230/460 V, 27.0/13.5 amps, 60 Hz, 3 phase. Viking Helical Gear Reducer: 7.95 ratio, 220 rpm output, part number: 3-551-012-795, size C. Overall dimensions: 4 ft. 10 in. L x 1 ft. 6 in. W x 2 ft. H.
Stock No: fpe_AACA4764.27  |   Mfg: Tri Clover  |   Model: PRE300-4M-VC4-SL-S  |   S/N: fpe_V9813

Tri-Clover PR60 Rotary Lobe Positive Displacement Pump. Model: PR60-3-UC4-ST-S. Serial No.: V6790. A3 certified. Maximum flowrate (at 20 PSI): 60 GPM. Pump displacement: 0.175 gallons per revolution. Maximum temperature: 200F. Static o-ring seals. Vented faceplate. Ladish Co. Tri-Clover Division Kenosha Wisconsin USA. Port size: 2 in. bevel seat. Overall dimensions: 10.625 in. W x 22 in. L x 14 in. H.
Stock No: fpe_NOIP1404  |   Mfg: Tri Clover  |   Model: PR60-3-UC4-ST-S  |   S/N: fpe_V6790

Used Tri Clover PR300 Rotary Pump. Model: PR300-4-TC1-4-SL-S. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. [2] 7-3/4 inch rotors. Missing motor. [2] 6 inch diameter flange. [8] 7/8 inch diameter mounting hole. 3-3/4 inch adjacent, 9-1/2 inch opposite. Overall dimensions: 5 feet 3-3/8 inches L x 2 feet 2-3/4 inches W x 1 foot 10-1/2 inches H.
Stock No: fpe_RCJF1611.15  |   Mfg: Tri Clover  |   Model: PR300-4-TC1-4-SL-S  |   S/N: fpe_U2583

Tri-Clover Rotary Pump. Model: PR300-4-TC1-4-ST-S. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. (2) 7-3/4 in. rotors. General Electric motor: 20 HP, 1770 RPM, 200-230/460 V, 49.2/24.6 A, 60 Hz, 3 Phase. FALK gear drive 4.001 ratio (442 final RPM). (2) 6 in. dia. flanges. (8) 7/8 in. dia. mounting holes. 3-5/8 in. adjacent, 9-1/2 in. opposite. Overall dimensions: 6 ft. 1-1/2 in. L x 1 ft. 9 in. W x 2 ft. 2 in. H.(GJ).
Stock No: fpe_RCJF1602.15  |   Mfg: Tri Clover  |   Model: PR300-4-TC1-4-ST-S  |   S/N: fpe_T7122J

Stock No: fpe_HDUL975B.12a  |   Mfg: Tri Clover  |   Model: PRR125-3M-UH4-LS-S  |   S/N: fpe_T1308J

Used Tri-Clover Positive Displacement Pump. Model: PRE300-4M-UH4-SL-S. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. [2] 7-3/4 inch rotors. Sterling Electric motor: 10 Hp, 1755 RPM, 230/460 V, 26.4/13.2 A, 60 Hz, 3 Phase. Sterling Electric drive: 10 output Hp, 1755/850 RPM in/out, 3.37 gear ratio. Inlet/outlet: [2] 4 inch S-Line. Overall dimensions: 5 feet 2 inches L x 1 foot 6-1/2 inches W x 2 feet 4-5/8 inches H.[G-J].
Stock No: fpe_TACJ0212.22a  |   Mfg: Tri Clover  |   Model: PRE300-4M-UH4-SL-S  |   S/N: fpe_T0136

Stock No: fpe_JBTC11  |   Mfg: Tri Clover  |   Model: S-PR125-3M-UC4-ST-S  |   S/N: fpe_S04145

Stock No: fpe_HDUL965B.4  |   Mfg: Tri Clover  |   Model: PRR25-11/2M-TC1-4-ST-S  |   S/N: fpe_R1719

Tri Clover Positive Displacement Rotary Lobe Pump. Model: PRRED125-2-1/2-UH4-SL-S. S/N: P1953J. Flow rate for new pump is 120 gpm with required horsepower and pressure. *Note: the rotors are missing and the gear drive was removed. Inlets/outlets: (2) 2 ½ in. dia. NPT. Overall dimensions: 5 ft. L x 1 ft. 4 in. W x 2 ft. 10 in. H.(ACN234).
Stock No: fpe_CSWB128.7  |   Mfg: Tri Clover  |   Model: PRRED125-2-1/2-UH4-SL-S  |   S/N: fpe_P1953J

Stock No: fpe_HDUL966B.7  |   Mfg: Tri Clover  |   Model: PRR25-11/2M-TH4-ST-S  |   S/N: fpe_K3767D

Used Tri-Clover TSR Positive Displacement Pump. Model: TSR4NLS-25MDU0KT-A0. Serial Number: 466714-01. 3-A sanitary rated. Capacity: 25 gallons per minute @ 84 psi. Seal option: Single mechanical seals. 5 horse power, 1725 Badlor motor and APG gear drive with a gear ratio of 5.0. will generate 345 rpm's [final]. The TSR is designed for thorough CIP cleaning. Another quality is the interchangeability of rotors for additional flexibility when working with a wider range of temperatures and viscosities. Rotor casing is fully swept, minimizing product entrapment. Handles a wide array of viscosities. Inlets/outlets: [2] 2-1/2 inches diameter S-line fittings. Mounted on base with [4] casters for easy positioning. Overall dimensions: 55-1/2 inches length x 20 inches width x 22 inches H. SOLD
Stock No: fpe_HDNN862.10  |   Mfg: Tri Clover  |   Model: TSR4NLS-25MDU0KT-A0  |   S/N: fpe_466714-01

Used 1994 Tri Clover TSR-Series positive displacement pump. Model: TSR1NSS-10MDV0WL-A. Serial Number: 190336-01. Capacity: 3 gallons per minute @ 7.5 psi. Displacement per Revolution: 0.006 gal. Word Gear Electric Motor, ½ horse power, 1700 rpm, 230/460 V, 1.84/.92 amps, 60 Hz, 3 phase. Drive, ratio: 3.89, rpm out: 437 [final]. The TSR-series pumps can handle media with wide viscosity ranges, are suitable for CIP [Cleaning In Place], and conform to USA 3A Sanitary Standard. The characteristic smooth, low shear pumping action is ideal for products such as creams, gels, emulsions, aerated mixtures, as well as delicate cells and organic solids in suspension. Inlets/outlets: [2] ¾ inches diameter S-line fittings. Overall dimensions: 2 feet 9 inches length x 1 feet 2 inches width. x 1 feet 3 inches height.(ACN60).
Stock No: fpe_OIP123.  |   Mfg: Tri Clover  |   Model: TSR1NSS-10MDV0WL-A  |   S/N: fpe_190336-01

Used Tri Clover PRS60 Positive Displacement Pump. Model: PRS60-3M-UH2-ST-S. Serial Number: 112929-01. Maximum capacity @ 20 psi: 60 gallons per minute. Displacement per 100 revolutions: 17.5 gal. Side-mount. Tri Clover pumps perform more effective on suction lift service; handle anything from liquids to semi-solids with entrained vapors. Reduced maintenance costs and downtime with their longer seal and rotor life. Inlets/outlets: [2] 3 inches diameter S-Line fittings. Overall dimensions: 1 feet 5 inches length x 1 feet 3 inches width x 1 feet 4 inches height.
Stock No: fpe_SKFC004.a  |   Mfg: Tri Clover  |   Model: PRS60-3M-UH2-ST-S  |   S/N: fpe_112929-01

Stock No: fpe_HDUL501.7a  |   Mfg: Alfa Laval  |   Model: GHPD-622  |   S/N: fpe_01-5-9403A

Used Tri-Flo Positive Displacement Pump. Model: SPRE300MTC1WTS. Flow rate for new pump is 300 gallons per minute with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. Seal option: single mechanical seals. Newman electric motor, 10 horse power, 1170 rpm, 230/460 V, 30/15 amps, 60 Hz, 3 phase. Motor pulley diameter: 4-1/2 inches Gear pulley diameter: 18-1/2 inches Rpm out: 284 [final]. Inlets/outlets: [2] 4 inches diameter S-line fittings. Overall dimensions: 4 feet 2 inches length x 2 feet 5 inches width x 2 feet 6 inches H.[acn291].
Stock No: fpe_CCPL002.  |   Mfg: Tri-Flo  |   Model: SPRE300MTC1WTS  |   S/N: fpe_

Used Tri-Clover Positive Displacement Pump. [2] 5-7/8 inch rotors. Inlet/outlet: [2] 2 inch S-line. Overall dimensions: 1 foot 3-1/2 inches L x 11 inches W x 1 foot 2 inches H.
Stock No: fpe_NOIP1105  |   Mfg: Tri Clover  |   Model:   |   S/N: fpe_

Used Tri Clover Rotary Pump. Model: PR300. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. [2] 7-3/4 inch rotors. Char-Lynn® Hydraulic drive no. 119 1031 003. Inlet/Outlet: [2] 6 inch diameter flange with [8] 7/8 inch mounting holes. 3-5/8 inch adjacent, 9-1/2 inch opposite. Overall dimensions: 3 feet 8-1/2 inches L x 1 foot 8 inches W x 1 foot 9-3/8 inches H.
Stock No: fpe_RCJF1609.15  |   Mfg: Tri Clover  |   Model: PR300  |   S/N: fpe_

Used Tri-Clover Rotary Pump. Model: PR300. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. [2] 7-3/4 inch rotors. [2] Flanges diameter: 6 inches. [8] mounting holes 7/8 inch diameter. Adjacent: 3-3/4 inches, opposite: 8-7/8 inches. Overall dimensions: 2 feet 1 inch L x 1 foot 8 inches W x 1 foot 6 inches H.
Stock No: fpe_RCJF1610.12a  |   Mfg: Tri Clover  |   Model: PR300  |   S/N: fpe_

Used Tri-Clover Positive Displacement Pump. [2] 6 inch rotors. Inlet/outlet: [2] 3 inch acme. Overall dimensions: 4 feet 8 inches L x 1 foot 10 inches W x 2 feet 5-1/2 inches H.
Stock No: fpe_RCJF1619.12a  |   Mfg: Tri Clover  |   Model:   |   S/N: fpe_

Used Tri-Clover Positive Displacement Pump. [2] 7-3/4 inch rotors. Eaton Corp. Char-Lynn® 10,000 series Hydraulic motor, model no: 119 1029 003. Inlet / outlet: [2] 6 inch diameter flange. [8] 7/8 inch mounting holes, 3-5/8 inch adjacent, 9-1/2 inch opposite. Overall dimensions: 3 feet 8 inches L x 1 foot 8 inches W x 1 foot 8-1/2 inches H.
Stock No: fpe_RCJF1632.32a  |   Mfg: Tri Clover  |   Model:   |   S/N: fpe_

Stock No: fpe_RCJF1632B  |   Mfg: Tri Clover  |   Model:   |   S/N: fpe_

Stock No: fpe_RCJF1633I  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Stock No: fpe_RCJF1633P  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Tri-Clover Positive Displacement Pump. [2] 6-1/2 inches rotors. [2] 4 inches ACME fittings. Overall dimensions: L. 1 feet 10-1/2 inches x width. 1 feet 1 inches x height. 1 feet 5 inches
Stock No: fpe_RCJF1633T  |   Mfg: Tri Clover  |   Model:   |   S/N: fpe_

Don't see what you're looking for? Let us know what you need.
© 2012 food-processing-equipment.biz - All Rights Reserved.