Inventory Index  >  Refrigeration  >  Pasteurizing/Warming/Cooling Tunnels

Used SMB Stainless Steel Cooling Tunnel. Model: 04.1.0.213. Serial Number: 3325. Maximum aperture/clearance above belt per section: 6 feet 5 inches width x 9 inches height. Conveyor infeed maximum aperture/clearance: 1 feet 3 inches width x 12 inches height. Conveyor infeed/exit height: 40 inches [14] 11-1/2 inches width x 6 inches height pan access ports. Sew-Eurodrive Motor [infeed conveyor], 4 horse power [3 kW], 1700 rpm, 330/575 V, 7.9/4.55 amps, 60 Hz, 3 phase. Sew-Eurodrive Variable Speed Drive. Sew-Eurodrive Motor [infeed conveyor], 4 horse power [3 kW], 1700 rpm, 330/575 V, 7.9/4.55 amps, 60 Hz, 3 phase. Sew-Eurodrive Variable Speed Drive, 9.1 rpm [min], 45.6 rpm [max]. SMB Stainless Steel Control Panel, includes toggle switches for: pump controls, conveyor controls, run controls. SMB Centrifugal Pumps. ASEA Motors, 2.0 horse power, 1730 rpm, 575 V, 2.5 amps, 60 Hz, 3 phase. [2] Fischbach Compact Fan Blowers. Brook Compton and Teco Electric Motors, 5 horse power, 1740 and 1750 rpm, 575 V, 5.4 and 5.04 amps, 60 Hz, 3 phase. Inlets: [1] 1-1/2 inches diameter media port, [1] 2 inches diameter NPT [media], [1] 2 inches diameter flanged port [media], [1] 2-1/2 inches diameter FNPT [media], [1] 3 inches diameter port [cooling media]. Outlets: [1] 1 inches diameter NPT [condensate], [1] 3 inches diameter discharge port [media]. Overall dimensions: 67 feet 3 inches length x 19 feet 2 inches width x 7 feet 1 inches height.[hb2] [ACN5400].
Stock No: fpe_CSWB352.40  |   Mfg: SMB  |   Model: 04.1.0.213  |   S/N: fpe_3325

Used Heinzen HMI Pasteurizing Conveyor for Whole Citrus Fruit. Maximum aperture/clearance above belt: 24 inches W x 5 inches H. Height at conveyor infeed/exit: 92/74 inches. This unit was part of a Fresh Express citrus line that was processing oranges and grapefruit. Product was pre-rinsed then sent to this unit for pasteurization prior to peeling. The HMI unit was setup for 2 minute dwell time with 180F hot water spraying from above the conveyor followed by a four-spray rinse section. Water was pumped from an insulated, external tank [screened and recirculated loop]. The tank was heated with live steam injection. Tank and circulation pump are not included. [3] Baldor Industrial washdown duty motors, 1/2 hp, 1750 rpm, 230/460 V, 1.6/.8 amps, 60 Hz, 3 phase. [2] Boston Gear Drives, 60 ratio, 29.61 rpm [final, infeed and pasteurizing conveyors]. Boston Gear Drive, 30 ratio, 58.3 rpm [final, exit conveyor]. Inlets: [1] 1 inch dia. PVC [dual spray bridge], [1] 2 inch dia. S-line fitting. Outlets: [1] 3/4 inch dia. PVC [final spray], [1] 4 inch dia. S-line fitting, [2] 6 inch dia. vents each with 11 inch dia. flanges and [8] 3/4 inch dia. thru-holes at a center-to-center distance of 3-1/2 inches. Overall dimensions: 1 foot 8 inches L x 4 feet 10 inches W x 9 feet H.[ACN1000].
Stock No: fpe_SFEP011.8a  |   Mfg: Heinzen Manufacturing Inc.  |   Model:   |   S/N: fpe_13810

1998 Stainless Steel Steam Tunnel Oven. Markings on nameplate appear to be Asian. Belt Width: 24 in. Belt gap: 0.5 in. Product height clearance: 2.75 in. Steam injection via piping beneath the belt. Insulated side panels with 33.5 in. x 15.5 in. access doors. Top access panels 27.5 in. x 31 in. Round vent discharge connections at each end. U.S. Motors Unimount 125 model E186 1 HP motor, 1,745 RPM, 3-phase, 60 Hz. U.S. Motors Varidrive gear box in U.S. Motors Syncrogear module. Square D Telemecanique model Altivar 16 motor controller included, but will ship loose with no enclosure. Features a belt tensioning devise. Temperature gauge reads up to 200 Celsius. Unit separates into two pieces for transportation. Overall length: 30 feet. Overall Dimensions (two sections): (A): 176 in. L x 45 in. W x 57 in. H. (B): 176 in. L x 58 in. W x 57 in H.
Stock No: fpe_PMHT04  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used High Temperature Steam Tunnel. Stainless steel construction. Dual parallel feed chain-link belts. Maximum aperture/clearance above belt: 48 inches width x 3-1/2 inches height. Belt width: 47 inches Infeed/exit height: 38 inches height. [2] Sew-Eurodrive Motors, 5 horse power, 1680 rpm, 230/460 V, 19.6/6.8 amps, 60 Hz, 3 phase. [2] Sew-Eurodrive Motor Drives, 38.47 ratio, 44 rpm [final]. Inlets: [2] 1-1/2 inches diameter NPT [female, steam]. Outlets: [1] 3 inches diameter stainless steel pipe [condensate], [1] 17-1/2 inches diameter vapor port with a 20 inches diameter flange and [12] 1/2 inches diameter thru-holes at a center-to-center distance of 5 inches Overall dimensions: 72 feet 6 inches length x 10 feet 8 inches width x 7 feet 4 inches height.
Stock No: fpe_pRCPK294.69  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used 2003 Doubl-Kold, Inc. Portable Hydro Chiller with Conveyor System. Chiller system includes: Baltimore Aircoil Company evaporative condenser: model VCL-148-L, [rated at 105 nominal ammonia tons], Baltimore Aircoil Company cooling coil bank, model HCC-733, with Morfab Company, Inc. double entry surge drum, Vilter reciprocating compressor package model: VMC 450 XL, 125 hp, with Standard Refrigeration Co. surge drum, all mounted on a Fruehauf trailer: model: PAA-NF-25-45N. Approximate overall dimensions of hydro chiller package: 45 feet 11 inches L x 8 feet W x 13 feet 11 inches H. Conveyor system includes [2] 33 feet x 24 inches wide product belts, washing station and cooling station [1136 sq. feet], upper deck 2 feet wide catwalk with 39 inches high safety rail, Berkley and Deming pumps, Arrow Hart manual motor controllers and Siemens controls. This system was designed to cool circulating water used for peas, lima beans, and garbanzo beans as they were picked from the field at approximate in and out temperatures of 105F to 35F at about 15,000 pounds per hour for one side[both sides were never operated]. The capacity of the hydro cooler is approximately 115,000 tons. Run time was 36 hours on per day with 4 hours down time enabling cleaning of tanks. Estimated amp draw at full load 460 volts 100 amps on conveyer section and 275 amps on refrigeration section. Approximate overall dimensions of conveyor system: 58 feet 2 inches L x 10 feet 10 inches W x 14 feet 1 inch H.(HB2)
Stock No: fpe_SSFF0144.400  |   Mfg: Doubl-Kold, Inc.  |   Model:   |   S/N: fpe_

Don't see what you're looking for? Let us know what you need.
© 2012 food-processing-equipment.biz - All Rights Reserved.