Inventory Index  >  Pulpers and Finishers  >  Paddle Finishers

FMC Paddle Finisher. Model 50. Finisher is equipped with (4) 22 in. L x 1-1/2 in. W paddles. Inlet: 3 in. dia. threaded. Product that passes through the screen is collected in a bottom mounted hopper with center discharge port (4 in. Tri-Clamp). Product overs / pomace is discharged from rectangular outlet at opposite end of the motor. Unit is not complete and the end plate does not look to be original. Nameplate is missing, unit appears to be an FMC 50. Fine screens can be mounted on the 7/8 in. x 7/8 in. cradle (available in 0.020, 0.023, 0.027, 0.033, 0.040, 0.045, 0.060, 0.078, 0.093, 0.125, 0.375, 0.500 inches). These are commonly used with large screens for pulping and finer screens for finishing. Overall dimensions: 63 in. L x 32 in. W x 35 in. H.
Stock No: fpe_CCFP270.  |   Mfg: FMC Technologies (JBT FoodTech)  |   Model: 50  |   S/N: fpe_N/A

Used Metro Products [Langsenkamp] Finisher, Model 500S, Serial Number F104, Motor 5 horse power 208-230/460 volts 1,725 rpm, brush paddles, screen size configurable, vat 23-1/2 inches length x 15-1/2 inches width x 14 inches H, 2 inches inlet to brush area, 4 inches x 6 inches oval solids outlet. Overall dimensions 5 feet length x 2 feet 4 inches width x 4 feet 4 inches height. [XMR26a]
Stock No: fpe_CJR11.12a  |   Mfg: Metro Products (Langsenkamp)  |   Model: 500S  |   S/N: fpe_F104

Stock No: fpe_JBTC03  |   Mfg: FMC  |   Model: PF50  |   S/N: fpe_9812

Used Langsenkamp Co. Brush Paddle Finisher/Pulper. Model: 500. Cylindrical screen chamber: 23 in. L x 11 in. dia [narrows to 9 in. dia]. Brush/paddle dimensions: [3] 23 in. L x 2 in. W. U.S. Electrical Motor, 2 hp, 220/460 V, 8.2/4.3 amps, 60 hz, 3 phase. Pulpers are designed for the separation of liquids and solids by means of paddles rotating concentrically within a cylindrical screen. The liquid and desired amount of solids pass through the screen. Where skin or seed shattering is a problem, brush paddles, as in this unit, can replace metal bars. Inlets: [1] 2-1/2 in. dia. NPT. Outlets: [2] 2-1/2 in. dia. FNPT [product out], [1] 3 in. W x 6-1/2 in. L. [discharge]. Overall dimensions: 4 ft. 9 in. L x 2 ft. W x 3 ft. 11 in. H.
Stock No: fpe_EMFP008.  |   Mfg: Langsenkamp  |   Model: 500  |   S/N: fpe_5146

Stock No: fpe_MDWF041  |   Mfg: Brown International Corp.  |   Model: 4000  |   S/N: fpe_4001-BAAA-138

Langsenkamp Stainless Steel Pulper / Finisher. Features rectangular inlet, painted steel frame, belt drive motor. Rotor and screen components are missing.
Stock No: fpe_AANF116.3  |   Mfg: Langsenkamp  |   Model: 144  |   S/N: fpe_1644

Stock No: fpe_RTTA525.12  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Stock No: fpe_SSFF1021.5  |   Mfg: Valley Foundry & Machine Works  |   Model:   |   S/N: fpe_

Don't see what you're looking for? Let us know what you need.
© 2012 - All Rights Reserved.