Used [5] 1991 FranRica Scraped Surface Heat Exchangers. Serial Number RFS94-HX-01, RFS95-HX-02, RFS70-HX-02, RFS95-HX-01. Previously owned and operated by Ragu Foods in Stockton, CA. [3] Water-cooled, [2] Ammonia-cooled units. Heating surface area: 50 square feet MAWP @ 375 F: 150 psig. MDMT @ 150 psig: 0 F. Sew-Eurodrive Motor, 25 horse power, 1760 rpm, 230/460 V, 66/55 amps, 60 Hz, 3 phase. Sew-Eurodrive Gear Drive, 21.08 ratio, 83 rpm [final], 18,055 in-pounds of torque. Inlets: [1] 4 inches diameter I-line fitting [product], [1] 1-1/2 inches diameter pipe [water], [1] 2 inches diameter pipe [ammonia]. Outlets: [1] 4 inches diameter I-line fitting [product], [1] 2 inches diameter S-line fitting [water], [1] 1 inches diameter pipe [ammonia]. Overall dimensions: 17 feet 7 inches length x 10 feet 6 inches width x 101 inches height.
Stock No: fpe_pRCPK297.113  |   Mfg: FranRica  |   Model:   |   S/N: fpe_RFS94-HX-01

Used Votator Scrape Surface Heat Exchanger 3 x 12. Model: X1-W. Serial Number: 62383. Chamber dimensions: 3 inches diameter x 12 inches L. Scraper shaft: 2-1/4 inches diameter x 11-3/4 inches L. [2] 11-3/4 in length x 1 inches width bakelite scrapers. U.S. Varidrive Speed Motor, 2 horse power, 1200 rpm, 220/440 V, 8.5/4.25 amps, 60 cycles, 3 phase, maximum speed: 1170 rpm, minimum speed: 242 rpm. Product inlet: [1] 3/4 inches threaded [male, jacket], 1-1/2 inches threaded [male]. Product outlet: [1] 3/4 inches threaded [male, jacket], [1] 1-1/2 threaded [male]. Overall dimensions: 52 inches length x 24 inches width x 36 inches H.[GK]
Stock No: fpe_RFPM480.1  |   Mfg: Votator  |   Model: X-I-W  |   S/N: fpe_82383

Used Votator Stainless Steel Scrape Surface Heat Exchanger 3 x 12. Model: X1D. Serial Number: 66710. Tube chamber dimensions: 3 inches diameter x 12 inches L. Concentric shaft: 1-3/4 inches diameter x 12 inches L. [2] Bakelite scrapers: 12 inches length x 1 inches width. U.S. Motor, 2 horse power, 1800 rpm, 230/460 V, 7.2/3.6 amps, 60 cycles. U.S. Varidrive Module, maximum speed: 1030 rpm, minimum speed: 103 rpm. Inlets: [1] 3/4 inches diameter NPT [female, jacket], [1] 1 inches diameter threaded [male]. Outlets: [1] 3/4 inches diameter NPT [female, jacket], [1] 3/4 inches diameter threaded [female]. Overall dimensions: 55 inches length x 18 inches width x 40 inches H.[GK].
Stock No: fpe_RFPM479.1  |   Mfg: Votator  |   Model: X-I-D  |   S/N: fpe_66710

Used Votator Stainless Steel Scrape Surface Heat Exchanger 3 x 12. Model: X1D. Serial Number: L303. Tube chamber dimensions: 3 inches diameter x 12 inches L. Concentric shaft: 1-3/4 inches diameter x 12 inches L. [2] Bakelite scrapers: 12 inches length x 1 inches width. U.S. Motor with Varidrive Module. Inlets: [1] 3/4 inches diameter NPT [female, jacket], [1] 3/4 inches diameter threaded [male]. Outlets: [1] 3/4 inches diameter NPT [female, jacket], [1] 3 inches diameter threaded [female]. Overall dimensions: 52 inches length x 24 inches width x 35 inches H.[GD]
Stock No: fpe_RFPM478.1  |   Mfg: Votator  |   Model: X-I-D  |   S/N: fpe_303

Stock No: fpe_AANF348.9  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Stainless Steel Two Barrel Scrape Surface Heat Exchanger . [2] 15 inches diameter x 10 feet 10 length barrels with [42] 1 inches length x 3 inches width bakelite scrapers. Setup for chilling with freon. [2] Erole Marelli Motors, 30 horse power, 1507 rpm, 265/460 volts 9.5/5.5 amps, 60 hertz. ratio 10.4, final rpm: 163. Inlets: [2] 1-1/2 inches diameter NPT [male], [1] 2 inches diameter media port. Outlets: [2] 1-1/2 inches diameter NPT [male]. Overall dimensions: 13 feet 7 inches length x 24 inches width x 66 inches height
Stock No: fpe_RAAF142.93a  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Jacketed Paddle Blender. Inside dimensions: 1 feet 3-1/2 inches diameter x 6 feet 10 inches L. Paddle size: 2 inches length x 2 inches width. Side scraper size: [3] 6 feet 8 inches length x 2-3/4 inches width. Access doors: [3] 1 feet 7-1/2 inches length x 11 inches width. Foote-Jones Powertech Gear Drive. Overall dimensions: 10 feet 10-1/2 inches length x 2 feet 8 inches width x 3 feet height.
Stock No: fpe_SHCA433.17  |   Mfg: Strong Scott  |   Model:   |   S/N: fpe_

Don't see what you're looking for? Let us know what you need.
© 2012 food-processing-equipment.biz - All Rights Reserved.