Inventory Index  >  Pumps  >  Other Pumps  >  Other Pumps

Morris / ITT Goulds RX Heavy Slurry Pump Model: 2RX. S/N: M-21058. The Goulds RX side-suction slurry pumps are designed for handling highly abrasive slurries. The suction/discharge ports can be rotated into different positions for ease of installation. Unit features replaceable wear liners, heavy duty frame, external impeller adjustments, etc. Common applications include: bauxite, wet process cement, lime slurry, dust collection systems, sand, chemical sludges, plate wastes, etc. The pump size 2x4x15.5 pumps up to 250 GPM at 250 feet of head (1750 RPM max). Westinghouse Life-Line T Motor, 15 HP, 1755 RPM, 230/460V, 39/19.5 amps, 60 Hz, 3-phase. Inlets: (1) 4 in. dia. flanged port. Outlets: (1) 2 in. dia. flanged port. Overall dimensions: 49 in. L x 28 in. W x 44-1/2 in. H. (ACN377).
Stock No: fpe_MRD653.a  |   Mfg: Morris Pumps, Inc. / ITT Goulds  |   Model: 2RX  |   S/N: fpe_M-21058

Used Labour Taber Pump. Model: DPL. Serial Number: L25544. Flow rate for new pump is 90 gallons per minute with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. Maximum speed: 1750 rpm. Size: 15. Impeller diameter: 8-3/8 inches Dayton Tri-Volt motor: 10 horse power, 1750 rpm, 208-230/460 volts, 28.6-26.2/13.1 amps, 60 HZ, 3 phase. Inputs/Outputs: [1] 2-5/8 inches flange inlet diameter 4 mounting holes with ¾ inches diameter 4 inches adjacent and 5-1/2 inches opposite. [1] 2-5/8 inches flange outlet diameter 4 mounting holes with ¾ inches diameter 4 inches adjacent and 5-1/2 inches opposite. Overall dimensions: 4 feet 1 inches L. x 1 feet 2-1/2 inches width. x 2 feet 8-1/2 inches height.(ACN198).
Stock No: fpe_DTWA506.  |   Mfg: Labour Pump Co.  |   Model: DPL  |   S/N: fpe_L25544

Used 1998 ITT AC Centrifugal Pump. Model: 150. Serial Number: AC-238164-0101. Size: 3x2.5x13. Capacity: 150 gallons per minute @ 175 tdh. Impeller diameter: 13 inches Maximum speed: 1800 rpm. Max. field hydrotest pressure: 175 psi. U.S. Motor, 20 Hp, 1765 rpm, 208-230/460 V, 55.9-49.6/ 24.8 FLA, 60 Hz, 3 phase. Inlets: [1] 3 inches diameter 125 lb. ANSI flange. Outlets: [1] 2-1/2 inches diameter 125 lb. ANSI flange. Shipping weight 702 pounds. Overall dimensions: 52 inches length x 20-1/2 inches width x 24 inches height.[h9-4i].
Stock No: fpe_DTWA210.1  |   Mfg: ITT  |   Model: 150  |   S/N: fpe_AC-238164-0101

Used Premier Pneumatics Rotary Airlock. Model: BTFS-B12-8NH-1-L. Serial Number: 9856-187. Marathon Electric Motor, 1 horse power, 1140 rpm, 575 V, 1.6 FLA, 60 Hz, 3 phase. Ohio Gear Reducer, 50 ratio, 22.8 rpm [final]. Motor is certified by Underwriter Laboratories to work in hazardous locations. Inlets: [1] 12 inches length x 9-1/2 inches width infeed with a 15-1/2 length x 11 inches width rectangular flange and [10] 1/2 inches diameter thru-holes. Outlets: [2] 3-1/2 inches diameter ports. Overall dimensions: 40 inches length x 33 inches width x 17 inches height.
Stock No: fpe_SGMT363.a  |   Mfg: Premier  |   Model: BTFS-B12-8NH-1-L  |   S/N: fpe_9856-187

Used Baker's Aid Stainless Steel Product Container/ Reservoir, Model RFF118, Serial Number 783, with Haight Model 30 pump, Serial Number 953230, Leeson Motor, Model M4C17FB16B, 1,725 rpm, 115 volt, 60 hertz. Pump has 1 inches inlet/ outlet. Overall dimensions 13 inches W, 26 inches L, 22 inches height.
Stock No: fpe_HDPH607.1a  |   Mfg: Bakers Aid  |   Model: RFF118  |   S/N: fpe_783

Used 2 cu ft Baker's Aid Portable Stainless Steel Reservoirs. Model RFF118, Serial Number 704, Leeson Motor model M4C17FB168, 1/3 horse power, 1,725 rpm, 60 hertz, 115 volt, 1 phase, Haight Pump Model 3D, Serial Number 943640, 1 inches Inlet, 1 inches outlet, overall dimensions 13 inches W, 26 inches L, 12 inches height.
Stock No: fpe_HDPH609.1a  |   Mfg: Bakers Aid  |   Model: RFF118  |   S/N: fpe_704

Used ARO Air Operated Pump. Model: 630408. 2-Ball style air pump designed to transfer medium viscosity fluids; typically in the range of 1,000 to 20,000 centipoise. Air inlet pressure range: 30-120 psi [2-8.3 bar]. Fluid pressure range: 270-1350 psi [18.3-91.8 bar]. Max. recorded cycles per minute: 60. Displacement per cycle: 11 cu inches [180.2 cu cm]. Cycles per gallon [liter]: 21 [5.5]. Flow @ 60 cycles/min: 2.8 gallons per minute [10.5 lpm]. Inlets: [1] 1-1/2 inches diameter suction tube. Outlets: [1] 1/2 inches ball valve. Overall dimensions: 10 inches length x 7 inches width x 32-1/2 inches height.
Stock No: fpe_SNPM014.3  |   Mfg: ARO Ingersoll Rand  |   Model: 630408  |   S/N: fpe_630408

Used Zangari Sanitary Liquid/Semi-Solid Pneumatic Pump. Model: 40-P. Serial Number: 241. Festo Double-Acting Cylinder, Serial Number: M341, Type: DNC-80-100PPV, maximum pressure: 145 psi. Inlets: [1] 3 inches diameter S-Line fitting. Outlets: [1] 2 inches diameter S-Line fitting. Overall dimensions: 4 feet length x 1 feet 8-1/2 inches width x 1 feet 5-1/2 inches height.
Stock No: fpe_QCAI488.2  |   Mfg: Zangari  |   Model: 40-P  |   S/N: fpe_241

2000 R.F. Hunter Co., Inc. Power Unit for a Filtrator. Model: ECCO ONE. Baldor electric motor: ½ hp, 1425/1725 rpm, 115/230 V, 9/4.5//7.6/3.8 amps, 50/60 Hz, 1 Phase. This is a power section to a filtrator unit designed to handle high temperature, edible oils. Various size oil containers can be used with this power unit. Inlet / outlets: [2] ¾ inch MNPT. Overall dimensions: 1 foot 4inches L x 10-¾ inches W x 10 inche H.[ACN9].
Stock No: fpe_MDFC005.a  |   Mfg: R.F. Hunter Co., Inc.   |   Model: ECCO ONE  |   S/N: fpe_17102

Stock No: fpe_KWBF181  |   Mfg: Viking  |   Model: C432  |   S/N: fpe_11838406

Used Goulds Submersible Sump Pump. Model: WP1034-02. Serial Number: 118. Impeller diameter: 6 inches Motor, 1 horse power, 460 V, 2.1 amps, 60 Hz, 3 phase. Inlets/outlets: [2] 2 inches diameter FNPT fittings. Overall dimensions: 17 inches length x 13 inches width x 16-1/2 inches height.
Stock No: fpe_DSLP038.2  |   Mfg: Goulds  |   Model: WP1034-02  |   S/N: fpe_118

Stock No: fpe_SKFI047.6  |   Mfg: Webtrol  |   Model: EZ Series  |   S/N: fpe_1091

Used 2004 Armstrong Condensate Pump Package. Model: DPT-308RP. Serial Number: 04055-01. Maximum capacity with steam motive: 23,000 pounds per hour with 125 psig motive pressure and 15 psig of back pressure. Maximum capacity with air motive: 26,200 pounds per hour with 75 psig motive pressure and 15 psig of back pressure. The condensate pump package is used to collect and return condensate from remote areas of the plant. As steam produced from a boiler is used throughout the plant and eventually turns to hot water or condensate, the pump returns it to make-up tank closer to the boiler, where it can be reclaimed, chemically treated, and reused in the boiler. This mechanical pump unit operates off of steam or air so electricity in not needed. Mechanical pump package benefits include: savings in production cost as water is reclaimed reduced space piping layout, minimized field labor, lessened installation errors and fewer safety mishaps. Overall dimensions: 5 feet 1 inches length x 5 feet width x 5 feet 10 inches height. [ACN119a]
Stock No: fpe_DLEC032.11  |   Mfg: Armstrong  |   Model: DPT-308RP  |   S/N: fpe_04055-01

Used Gomes Technology High Pressure Pump. Model: BRATEX D3/F. Serial Number: 0403980001. Electric Motor. Inlets: [1] 3/4 inches diameter FNPT fitting. Outlets: [1] 1/2 inches diameter FNPT fitting. Pump and motor are mounted on a four wheel cart. Overall dimensions: 2 feet 11 inches length x 1 feet 7 inches width x 2 feet 5 inches height. [BB].
Stock No: fpe_DSVT015.1  |   Mfg: Gomes Technology S.P.A.  |   Model: BRATEX D3/F  |   S/N: fpe_0403980001

R & D Machine Heated Drum Unloader. (1) Thomsen centrifugal pump with a Baldor motor: Model no. 50321-KA—S, serial no. 3A47444. Motor specs: ½ hp, 1725 rpm, 115/230 v, 7.4/3.7 a, 60 Hz, 1 phase. (1) Wilden 316 stainless steel, model 4 diaphragm pump, used for unloading. (1) Dayton motor: ½ hp, 1725 rpm, 115/208-230 v, 8.2/4.0-4.1 a, 60 Hz, 1 phase. Motor has a Boston Gear drive: .470 input hp, 557 output torque, 33.99 ratio. (1) Dayton motor: ¾ hp, 1725 rpm, 115/208-230 v, 9.2/4.7-4.6 a, 60 hz, 1 phase. Motor has a Boston Gear drive: 1.15 input hp, 1457 output torque, and 36.29 ratio. Inlets/outlets: (1) 2 in. ACME, (2) 1-1/2 in. ports, (1) 1 in. FNPT. Overall dimensions: 4 ft. ¼ in. L x 3 ft. 8 in. W x 6 ft. 7 in. H.
Stock No: fpe_SSND281.15  |   Mfg: R & D Machine  |   Model:   |   S/N: fpe_04/05-3344

Used Midwest Pump and Meter Co. 3 inches inlet and outlet.
Stock No: fpe_103  |   Mfg: Midwest Pump and Meter Co.  |   Model:   |   S/N: fpe_

Used Burgess Manning Positive Displacement Rotary Blower/Vacuum Pump. Louis Allis Motor, 7.5 horse power, 1760 rpm, 208-220/440 V, 20/10 amps, 60 Hz, 3 phase. Inlets/outlets: [2] 3 inches diameter ports. Overall dimensions: 4 feet 4 inches length x 2 feet 4 feet height.
Stock No: fpe_212  |   Mfg: Burgess Manning  |   Model:   |   S/N: fpe_

Used Burgess Manning pump cat no. ca3 part no. 4400-180-2. with louis allis drive 7.5 horse power, 1,760 rpm and 3 phase.
Stock No: fpe_215  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used 1993 Weil Wastewater Submersible Pump. Model: 2502. Motor, 1-1/2 horse power, 1750 rpm, 208 V, 6.0 FLA, 60 Hz, 3 phase. Cast iron construction. It uses a series 300 stainless steel shaft and double seal grease lubricated bearings. All Weil pumps consistently outweigh and outlast similar pumps. The difference is by design to make the best. The result: a distortion-free part with high rigidity, consistent machined dimensions, and a longer service life due to increased wall dimensions. Inlets: [1] 2-1/2 inches inlet port with an 8-1/2 inches diameter screen. Outlets: [1] 2 inches outlet port with oval-shaped flange, [2] ½ inches bolt holes. Overall dimensions: 14 inches length x 12 inches width x 30 inches height.
Stock No: fpe_ASLC029.  |   Mfg: Weil  |   Model: 2502  |   S/N: fpe_

Weil Wastewater Submersible Pump. Model: 1603. Motor, 10 hp, 1750 rpm, 208-230/460V, 34.0-34.0/17.0 amps, 60 Hz, 3 phase. Cast iron construction with a 3 in. dia. bronze discharge impeller. Flowrate: 350 GPM at 60 ft. head. Maximum Head: 90 ft. at 80 GPM. It uses a series 300 stainless steel shaft and double seal grease lubricated bearings. All Weil pumps consistently outweigh and outlast similar pumps. The difference is by design to make the best. The result: a distortion-free part with high rigidity, consistent machined dimensions, and a longer service life due to increased wall dimensions. Inlets: (1) 4 in. inlet port with a 10-1/2 in. dia. screen. Outlets: (1) 2-1/2 in. outlet port. Overall dimensions: 18 in. L x 15 in. W x 38 in. H.
Stock No: fpe_ASLC030.  |   Mfg: Weil  |   Model: 1603  |   S/N: fpe_

Used Bosch Pnematic Fluid Pump. Inlet: [1] 1/2 inches diameter port [product in]. Outlet [1] 1 inches diameter discharge hose [product out]. Air inlet: [1] 1/4 inches diameter quick connect fitting. Air outlet: [1] 1/4 diameter port. Overall dimensions: 8 feet length x 7-1/2 inches width x 2 feet 5 inches height.
Stock No: fpe_CSWB103.1a  |   Mfg: Bosch  |   Model:   |   S/N: fpe_

Used Ingersoll Rand Aro Corporation Piston Drum Pump. Model: 612041-X. Nominal capacity: 14 gallons per minute. Inlets: [1] 3/4 inches diameter port. [product in]. Outlets: [1] 1 inches diameter FNPT [product out]. Air inlet: [1] 1/4 inches diameter quick connect fitting. Air outlet: [1] 1/2 inches diameter port. Overall dimensions: 8-1/2 inches length x 3 inches width x 4 feet 5 inches height.
Stock No: fpe_CSWB103B.   |   Mfg: Ingersoll Rand ARO Corporation  |   Model: 612041-X  |   S/N: fpe_

Used Small pump on cart.
Stock No: fpe_DBP146.1  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Un-used Opti-Flow Closed Loop Water Pressure Supply System. Goulds Centrifugal Pump with a 15 gallon, stainless steel pressure tank. Working pressure: 125 psi. Typical applications: water circulation, booster service, liquid transfer, spray system, chillers, washing/cleaning systems, injection molding cooling, reverse osmosis, air scrubbers, heat exchangers, filtration systems, jockey pumps, OEM applications and general water services. Emerson Motor, 3 horse power, 3450 & 2850 rpm, 208-230/460 & 190/380-415 V, 8.5-8.0/4.0 & 9.4/4.7-4.3 amps. Pump inlet/outlet: 1-1/2 inches threaded male, Tank inlet: ¾ inches valve, 1-1/2 inches valve, tank outlet: 1-1/2 inches valve. Overall dimensions: 49 inches length x 21-1/2 inches width x 55 inches height.
Stock No: fpe_DCBJ190.3a  |   Mfg: Opti-Flow  |   Model:   |   S/N: fpe_

Used Portable Transfer Pump- 8 horse power. Model: 195432. Cast iron construction with 15-1/2 inches dia rubber wheels. Briggs & Stratton Gasoline Engine, 8 horse power @ 3600 rpm. Inlets: [1] 3-1/2 inches diameter type D coupler, [1] 5 inches diameter lid. Outlets: 3 inches diameter spool adapter, [1] 5 inches diameter lid. Overall dimensions: 35 inches length x 22-1/2 inches width x 26-3/4 inches height.[h9].
Stock No: fpe_DFPC256.1a  |   Mfg: Not Specified  |   Model: 195432  |   S/N: fpe_

Used Grundfos Pump. Model: A40176078E P1 9924. Type: CRN2-190U G-G-AUUE. Pump capacity: 11 gallons per minute @ 593 feet MAWP: 300 psi max @ 250° F. Inlets/outlets: [2] 1-1/2 inches diameter flanged ports. Overall dimensions: 10 inches length x 6 inches width x 1 feet 10 inches height.
Stock No: fpe_DPPX41527F.  |   Mfg: Grundfos  |   Model: A40176078E P1 9924  |   S/N: fpe_

Used Grundfos Pump. Model: A40176078E P1 9924. Type: CRN2-190U G-G-AUUE. Pump capacity: 11 gallons per minute @ 593 feet MAWP: 300 psi max @ 250° F. Inlets/outlets: [2] 1-1/2 inches diameter flanged ports. Overall dimensions: 10 inches length x 6 inches width x 1 feet 10 inches height.
Stock No: fpe_DPPX41527G.  |   Mfg: Grundfos  |   Model: A40176078E P1 9924  |   S/N: fpe_

Used Bakers Aid Portable Stainless Steel Reservoirs with Haight 1/3 horse power Mounted Pump. 26 inches length x 13 inches width x 13 inches D.
Stock No: fpe_HDPH608.1a  |   Mfg: Bakers Aid  |   Model:   |   S/N: fpe_

Used Pre-Heater System. Myers Pump. Pump Cat. No: HJ50S. Serial Number: 673-777. Pumptro motor, ½ horse power, 115/230 V, 60 Hz. Heat Exchanger, test pressure: shell: 200 psi; tube: 200 psi. Heat exchanger dimensions: 2-1/8 inches diameter x 14-1/2 inches height. Perfex Stainless Steel Filter Tube, filter dimensions: 4-1/2 inches diameter x 40 inches height. Pump inlets/outlets: 1-1/2 inches threaded male. Heat exchanger and filter inlets/outlets: ¾ inches Overall dimensions: 35 inches length x 20 inches width x 58 inches height.
Stock No: fpe_HDTD082.1  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Motors, Pumps and Rack. includes rail with cm chain hoist
Stock No: fpe_KWBF750.6  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Pump, 3 horse power 208-220/440 volts, 3,450 rpm, 2 inches female threaded inlet and outlet, 14 inches height x 8 inches width x 18-1/2 inches L.
Stock No: fpe_ME00a  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Stock No: fpe_NOIP1118  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used ECO GearChem® Positive Displacement Pump. Model: G8-AQQ-ZTY. Leeson motor: 3/4 hp, 1725 rpm, 208-230/460 v, 2.8/1.4 a, 60 Hz, 3 phase. [2] 1-3/4 inch diameter x 2-1/2 inch L rotors. Inlet/outlet: [2] 1-1/2 inch FNPT. Overall dimensions: 1 foot 10 inches L x 1 foot 4-1/4 inches W x 11 inches H.
Stock No: fpe_OIP137  |   Mfg: Eco Gearchem  |   Model: G8-AQQ-ZTY  |   S/N: fpe_

Used [2] Knight Peristaltic Metering Pump. Model: PMP. Never installed.
Stock No: fpe_RPCN004.a  |   Mfg: Knight   |   Model:   |   S/N: fpe_

Used Hydraulic Pump
Stock No: fpe_SFEC3910.a  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Master Flex L-S Tubing Pump, 15 and 24 tubing, Model 7518-12, Master Flex L/S 56C motor adapter, 18.3 to 1 speed reduction, OEM: Cole-Parmer Instrument Company Vernor Hills IL, drive 1/2 horse power 208-230/460 volt 1,720 rpm, 2 inches stainless steel framing, overall dimensions 22 inches length x 20 inches width x 44 inches height.
Stock No: fpe_SGM116(1)  |   Mfg: Master Flex L-S  |   Model: 7518-12  |   S/N: fpe_

Used Dual Pump System. [2] Lesson Motors [Washdown Design], 1/2 horse power, 1750 rpm, 90 V, 4.9 amps. [2] Dodge Gear Drives 12.70 ratio, 1750 input rpm, 137.8 output rpm. Torque: 257 inches/lb. Overall dimensions: 29 inches length x 27 inches width x 40 inches height.
Stock No: fpe_SKFC016.1  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Cooling Pump
Stock No: fpe_SNBB394.0  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Portable Transfer Crepaco Pump, Serial Number 4-74, Baldor motor 1/2 horse power 115-208/230 volts 1,725 rpm, 1.5 inches inlet/discharge, float tank 14 inches D x 14 inches height x 12 inches Deep, 38 inches length x 23 inches height x 22 inches width.
Stock No: fpe_SWC305a.2  |   Mfg: Crepaco  |   Model:   |   S/N: fpe_

Used Oil Pump with Motor- 0.25 horse power. Electrical requirements: 1800 rpm, 115 V, 4.9 FLA, 60 Hz, single phase. Tank capacity: approx. 14.7 gal. Inlets/outlets: [1] 1/4 inches diameter copper tube, [3] 1/2 inches diameter copper tubes, [1] 1 inches diameter copper tubes. Overall dimensions: 30 inches length x 22 inches width x 22 inches height.
Stock No: fpe_THHS001C.  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Stock No: fpe_TMCB169  |   Mfg: Stafsjö  |   Model: T-MVU 450 / 77  |   S/N: fpe_

Used Goulds Pumps, Inc. Sewage Pump. Model: WS0534BFC. Electrical requirement: 1/2 Hp, 1750 rpm, 460 V, 1.7 A, 60 Hz, 3 Phase. Inlet/outlet: [2] 2 inch NPT. ports. Overall dimensions: 1 foot L x 8 inches W x 1 foot 3-3/4 inches H.
Stock No: fpe_TMCB171  |   Mfg: Goulds  |   Model: WS0534BFC  |   S/N: fpe_

Don't see what you're looking for? Let us know what you need.
© 2012 food-processing-equipment.biz - All Rights Reserved.