Inventory Index  >  Material Handling  >  Metal Detectors

Stock No: fpe_TFAR004  |   Mfg: Goring Kerr  |   Model: SH Board  |   S/N: fpe_TJ 7902

Eriez E-Z TEC Metal Detector MPC Microprocessor Control. P/N: 815465. 3N-9603578. S/N: ACC49010001. Includes PCB and Door. Overall dimensions: 10 in. L x 9 ½ in. W x 2 ½ in. H.
Stock No: fpe_BDPC543B  |   Mfg: Eriez Manufacturing Co.  |   Model: E-Z TEC MPC  |   S/N: fpe_ACC49010001

Thermo Fisher Scientific / Ramsey Technology / Icore Checkweigher and Metal Detector. Model: AutoCheck 8000. Frame: 8120. S/N: 93MJ060. Dual conveyor belt dimensions: 7 ft. 10 in. L x 1 ft. 2 in. W. Infeed/exit height: 31 ½ in. Metal Detector: Ramsey Icore Metal Scout. Maximum aperture/clearance: 1 ft. 2 in. L x 6 in. H. Dual pneumatic reject mechanism dimensions: (2) 8 in. L x 6 in. W. (2) Electrol Company Electric Motors, ¼ hp, 1725 rpm, 90 V, 3 amps, 60 Hz, single phase. Pacific Scientific Electric Motor, ¼ hp, 1750 rpm, 90 V, 2.5 amps, 60 Hz, single phase. *Note: both the detector and weigher units are missing parts in the control panel. Currently non-functional. Overall dimensions: 9 ft. 3 in. L x 3 ft. 3 in. W x 5 ft. 2 in. H. (H10/16)(ACN400).
Stock No: fpe_HDFD068.8  |   Mfg: Ramsey Technology  |   Model: AutoCheck 8000  |   S/N: fpe_93MJ060

1995 Eriez E-Z Tec® III Metal Detector with MPC Control. Model EZ35X12. Maximum aperture / clearance above belt: 1 ft. W x 5 in. H. Infeed / exit height: 3 ft. 3 in. Sensitivity previously tested and rated with test strips for 1.5 mm ferrous metals, 2.0 mm non-ferrous metals, and 2.0 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditions, product tested, and other factors. The MPC or microprocessor control allows for easy adjustment of sensitivity, phase and reject. The MPC also has the ability to store adjustment parameters and give rejection reports. Wash down duty, stainless steel enclosure. Power requirements: 110 VAC, 1 phase, 60 Hz. *Note: the unit is currently non-functional. Overall dimensions: 3 ft. 3 in. L x 2 ft. 8 in. W x 4 ft. 2 in. H.(H16)(ACN100).
Stock No: fpe_GICS175.2a  |   Mfg: Eriez Manufacturing Co.  |   Model: EZ35X12  |   S/N: fpe_65960-1

1993 Goring Kerr Metal Detector. Model: Tek 21. S/N: 48334. Sensor capacities: 1mm ferrous, 1.5 mm non-ferrous, 3 mm stainless steel. Maximum aperture/clearance above belt without applied load: 38 in. W x 1 in. H. Maximum aperture/clearance above belt with applied load: 38 in. W x 3-3/4 in. H. Features pneumatic reject device. Electrical requirements: 110 V, 50/60 Hz. Baldor Industrial Motor: 1 hp, 1,725 rpm, 208-230/460 V, 60 Hz, 3 phase. Hub City Motor Drive: 1/1 ratio. *Note: Unit is missing its controls. Overall dimensions: 5ft. 10 in. L x 4ft. 9 in. W x 3ft. 8 in. H. (H16).
Stock No: fpe_SPPF295.16  |   Mfg: Goring Kerr  |   Model: TEK21  |   S/N: fpe_48334

Used Lock Metal Check 9 Metal Detector. Model: HDS. Serial Number: 20264. Height at conveyor infeed: 46 inches Height at conveyor exit: 47 inches Maximum aperture/clearance above belt: 30 inches width x 2 inches height. 16 inches length x 28 inches width. Sensitivity tested with test strips as 2.5 mm ferrous metals, 2.5 non-ferrous metals, and 3.5 mm non-magnetic stainless steel. Chain link belt conveyor feeds a rubber belt pass-thru conveyor. Metal detector is set up with a pneumatic reject mechanism. Baldor Stainless Steel Industrial Motor, 1 and .75 horse power, 1740/1440 rpm, 208-230/190 V, 3.2-3/2.8 amps, 60/50 Hz, 3 phase. Overall dimensions: 63 inches length x 46 inches width x 53 inches height.[h10]
Stock No: fpe_GAKD506.35  |   Mfg: Lock Inspection Systems  |   Model: HDS  |   S/N: fpe_20264

Thermo Goring Kerr Metal Detector. Serial number: 04132340. Board reads: Search Head 114-6500, 3 REV4.0. Detector opening size: 28 in. W x 10 in. H. Overall dimensions: 48 in. L x 16 in. W x 22 in. H
Stock No: fpe_TFAR091.a  |   Mfg: Goring Kerr  |   Model:   |   S/N: fpe_04132340

Stock No: fpe_HGPS294.4  |   Mfg: Safeline Inc.  |   Model:   |   S/N: fpe_

Stock No: fpe_NOI1106  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used 2002 Industrial Magnetics Inc. Drawer-In-Housing Magnetic Trap. [5] 1 inches diameter x 11 inches height magnetic tubes. Designed for ferrous metal separation in dry processing systems, the Industrial Magnetics Drawer-In-Housings consist of a rows of round magnetic tubes that are assembled into drawers. Flowing product is forced to cascade in a zigzag pattern from row to row over the magnetic tubes, ensuring maximum tramp metal capture as the product comes into direct and repeated contact with magnets as it travels through the housing. This is designated as an “EZ-Clean” unit and is suited for use with food materials, having 304 stainless steel contact points and minimal cracks or crevices between parts. Overall dimensions: 1 feet 5-1/2 inches length x 1 feet 5 inches width x 2 feet 2-1/2 inches H.[ACN48]. [GI].
Stock No: fpe_PGFL173C.  |   Mfg: Industrial Magnetics Inc.  |   Model:   |   S/N: fpe_

Used Metal Detector Conveyor Frame. (no sensing head)
Stock No: fpe_SFEC3909.a  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Magnetic Plate and Tube Trap. [8] 1 inches diameter x 13-1/2 inches height magnetic fingers. Dual handle allows for easy dipping and removing. Magnets remove the hazards of unwanted ferrous and work-hardened stainless contaminants from processing lines. They capture the very finest of particles that pass undetected through electronic metal detectors. Overall dimensions: 19 inches length x 11 inches width x 18 inches height.
Stock No: fpe_SGMT342B.1a  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Conveyor Section with Reject Mechanism. Belt dimensions: 48 inches length x 12 inches width. Reject mechanism pneumatically operated; [2] sensors. Baldor motor: 5 horse power, 1,725 rpm, 208-230/460 V, 1.9/.9 amps, 60 Hz, 3 phase. Ideal for placement immediately after metal detectors and checkweighers for defective product ejection. Overall dimensions: 4 feet length x 4 feet 10 inches width x 2 feet 9 inches height.[h16].
Stock No: fpe_SNBB249.0  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Stock No: fpe_TACJ0358.a  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Bunting Magnetics Co. Powder Flow Thru Magnet. [2] Magnetized doors. [1] 8 inch diameter inlet. [1] 8 inch L x 8 inch W outlet. Overall dimensions: 1 foot 7-5/8 inches L x 1 foot ¾ inch W x 1 foot 1-1/2 inches H.
Stock No: fpe_TACJ0360.2  |   Mfg: Bunting Magnetics Co.  |   Model:   |   S/N: fpe_

Unused Goring Kerr Metal Detector Part. Board no.: DP-7942. PC Power Supply. (ACN12)
Stock No: fpe_TFAR001  |   Mfg: Goring Kerr  |   Model: DP-7942  |   S/N: fpe_

Stock No: fpe_TFAR001B  |   Mfg: Goring Kerr  |   Model: DP-7942  |   S/N: fpe_

Stock No: fpe_TFAR002  |   Mfg: Goring Kerr  |   Model: 114-6504 I/O  |   S/N: fpe_

Stock No: fpe_TFAR003  |   Mfg: Goring Kerr  |   Model: DSP3CPU  |   S/N: fpe_

Stock No: fpe_TFAR003B  |   Mfg: Goring Kerr  |   Model: DSP 3  |   S/N: fpe_

Stock No: fpe_TFAR088.1  |   Mfg: Goring Kerr  |   Model:   |   S/N: fpe_

Stock No: fpe_TFAR089.1  |   Mfg: Goring Kerr  |   Model:   |   S/N: fpe_

Goring Kerr Metal Detector. Board reads: PLC 1988, TK 7902, SH Board, ISS 1D, 1992. Detector opening size: 28 in. W x 10 in. H. Overall dimensions: 48 in. L x 16 in. W x 22 in. H
Stock No: fpe_TFAR090.a  |   Mfg: Goring Kerr  |   Model:   |   S/N: fpe_

Don't see what you're looking for? Let us know what you need.
© 2012 - All Rights Reserved.