Inventory Index  >  Material Handling  >  Hopper Feeders

Used Dual APV Stainless Steel Feeding Hopper Tank and Pumps. Capacity: 360 gallons dry capacity. [2] Pumps, Model: R4RI Serial Number: P822 2-0298, Inlets: 6 feet L. x 3 feet width. x 1 feet 6 inches height. [infeed hopper] Outlets: [2] 3-1/2 inches diameter NPT fittings. Inside-straight wall dimensions: 6 feet L. x 2 feet 11 inches width. x 3 feet 8 inches height. Overall dimensions: 6 feet 5 inches length x 3 feet 5 inches width x 4 feet 10 inches height.[h17].
Stock No: fpe_RBFM824.20  |   Mfg: Crepaco  |   Model: R4RI  |   S/N: fpe_H-9785-95, P822 2-0298

Used Young Industries Hopper with Mixer. Serial Number: FBD-528. Shop No: 7581. Cust. No: 18407. Infeed hopper dimensions: 44 inches length x 29 inches width. Unit is equipped with 5-1/2 inches long x 1-1/2 inches wide, 3-blade propeller. [8] 5 inches ports. Baldor Electric Motor. 1/3 horse power, 1725 rpm, 208-230/460 V, 60 Hz, 1.8-1.6/0.8 amps, 3 phase. Boston motor, ratio: 5, 345 rpm [final]. Inlets: [1] 30 inches length x 29 inches width infeed, [1] 3 inches port, [1] 7 inches port infeed. Outlet: [1] 3-1/2 inches discharge port. Overall dimensions: 60 inches length x 54 inches width x 67 inches height.
Stock No: fpe_PMI87a.1  |   Mfg: Young Industries  |   Model:   |   S/N: fpe_FBD-528

APV Crepaco Stainless Steel Holding Tank and Pump – 300 Gallons. Model: M.H. S/N: C-0611. Infeed hopper diameter: 6 ft. Hopper wall thickness: 0.118 inches. APV Crepaco Positive Displacement Pump with Baldor Industrial Motor, 15 hp, 1760 rpm, 208-230/460 V, 40-37/18.5 amps, 60 Hz, 3 phase. Motor drive. Inlets: (1) 9 in. L x 6-1/2 in. W infeed. Outlets: (1) 4 in. dia. discharge ACME fitting. Overall dimensions: 7 ft. 11 ft. L x 6 ft. 1 in. W x 7 ft. 9 in. H.
Stock No: fpe_KAAM0219.7a  |   Mfg: Crepaco  |   Model: M.H.  |   S/N: fpe_C-0611

Used Cherry-Burrell Tank. Rated capacity: 300 gallons. Inside dimensions: 57 inches diameter x 2 feet 1-1/2 inches straight wall. Materials of construction include 304 stainless steel. Inlet/outlet: [1] 2 inch MNPT, [1] 11 inch L x 6 inch W. Overall dimensions: 5 feet 3 inches L x 5 feet W x 6 feet 10 inches H.
Stock No: fpe_NOI1111  |   Mfg: Cherry-Burrell  |   Model:   |   S/N: fpe_73E546

Used General Mills Stainless Steel Tank/Hopper- 2500 Gallon. Serial Number: 01057099. Inlets: [1] 1-1/2 inches diameter S-line, [1] 2-1/2 inches diameter pipe, [1] 3 inches diameter threaded fitting, [2] 19-1/2 inches diameter clamp ports. Outlets: [1] 43 inches diameter outlet with a 50 inches diameter flange and [8] 5/8 inches diameter attachment holes at a center-to-center distance of 46 inches Overall dimensions: 91 inches diameter x 18 feet 4 inches height.
Stock No: fpe_SGMI250.31  |   Mfg: General Mills  |   Model:   |   S/N: fpe_1057099

Used 1994 Cozzini Vacuum Chamber Processor with Pump. Model: VP-700. Approximate throughput capacity: 11,000 pounds per hour. Approximate vacuum chamber capacity: 185 gallons. Tri-Clover positive displacement pump. Reliance electric motor, 7-1/2 horse power, 1755 rpm, 230/460 V, 27/13.5 amps, 60 Hz, 3 phase. Reliance electric variable speed module, rpm [min/max]: 450/45. Typically used in the processing of meat emulsions such as wieners and hot dogs, the Cozzini VP-700 removes air from the product prior to packaging, thus ensuring product uniformity and increasing shelf life. Inlets: [1] 3/8 inches diameter FNPT, [1] 3/4 inches diameter FNPT ball valve, [1] 2 inches diameter FNPT, [1] 2 inches diameter S-line fitting, [2] 4 inches diameter S-line fitting. Outlets: [1] 9 inches length x 2-1/2 inches width discharge. Overall dimensions: 7 feet 8 inches length x 4 feet 8 inches width x 7 feet 4 inches H.[ACN400].
Stock No: fpe_KAAM0418.13  |   Mfg: Cozzini  |   Model: VP-700  |   S/N: fpe_0128

Stainless Steel Hopper / Feeder. Previously used in a Apple Line Drying System. Includes: Eriez stainless steel hopper with tray, (2) Eriez magnetic vibrators, and 16 in. W x 8 ft. L Intralox conveyor with drive and control box.
Stock No: fpe_AANF261  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used 1992 FMC Syntron Cone Vibratory Shaker. Shaker features a 31 inches diameter x 45 inches height. conical hopper with attached lid. Product exits through a 28 inches length x 10 inches width x 4 inches height. chute. Inlets/outlets: [1] 8 inches diameter central inlet, and [1] 6-1/2 inches diameter central outlet. Syntron Magnetic Vibrator Motor, Model: V-20. Serial Number EE11822115 V, 2.0 amps, 60 Hz. Syntron Magnetic Feeder, Model: F-152 A. Serial Number: L69952115 V, 2.5 amps, 60 Hz. Equipment is frame-mounted. Overall dimensions: 36 inches length x 31 inches width x 61 inches height.
Stock No: fpe_CCFP505.  |   Mfg: FMC Technologies (JBT FoodTech)  |   Model:   |   S/N: fpe_

APV Stainless Steel Feeding Hopper Tank with Pumps - 60 Gallon. Infeed-hopper dimensions: 4 ft. 1 in. L x 2 ft. 7 in. W x 2 ft. H. (2) APV Crepaco positive displacement pumps, Leeson electric motor, 1 hp, and Nord gear speed reducer (27 final rpm). Overall dimensions: 4 ft. 1 in. L x 3 ft. W x 4 ft. H.
Stock No: fpe_DNBA037  |   Mfg: APV  |   Model: R3RIRH  |   S/N: fpe_

Used D&F Poultry Ice Hopper and Auger. Baldor motor, 1 horse power, 1725 rpm, 208-230/460 V, 3.6-3.4/1.7 amps, 60 Hz, 3 phase. Flexaline motor drive, 60 ratio, maximum input: 0.9 horse power, rating: 1750 rpm, output: 28.75 rpm. Stainless steel body. Container capacity: 120 gallon. [3] Screws: 6 inches diameter x 47 inches L. Inlet: 20 inches length x 20 inches width. Outlet: 14 inches length x 12 inches width. Overall dimensions: 81 inches length x 29 inches width x 58 inches height. [ACN85]
Stock No: fpe_EKTF7260.2  |   Mfg: D&F  |   Model:   |   S/N: fpe_

Used Stainless Steel Ice Hopper and Auger. Baldor motor. Boston motor drive. Capacity: 100 gallon. [3] Screws: 6 inches diameter x 53 inches L. [2] Sight glasses: 10 inches length x 4 inches width. Lid opening: 21-1/2 inches length x 12-1/4 inches width. Inlet: 21 inches length x 10 inches width. Outlet: 12 inches length x 12 inches width. Overall dimensions: 92 inches length x 31 inches width x 54 inches height.
Stock No: fpe_EKTF7260B.2  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Shick Tube-Veyor Scale and Receiving Hopper- 40 Cu. Ft. Mat'l constr: ASTM A240 304 stainless steel. Rotary Airlock Valve with U.S. Motor, 3/4 horse power, 1750 rpm, 230/460 V, 3.6/1.8 amps, 60 Hz, 3 phase and a Torqube Drive, ratio: 60.1, torque: 1190, final rpm: 29. [3] legs. Scaling and receiving hoppers are used in pressure, vacuum and gravity scaling and receiving applications. Inlets: [3] 4 inches diameter ports. Outlets: [2] 4-1/2 inches diameter discharge. 17 inches length x 18-1/2 length manway. Overall dimensions: 50 inches length x 50 inches width x 10 feet 6 inches height.[hb1]
Stock No: fpe_HDAF901.14  |   Mfg: Shick  |   Model:   |   S/N: fpe_

Used Stainless Steel Hopper with Rotary Airlock. Infeed hopper dimensions: 36 inches length x 36 inches width. Hopper uses a 36 inches length x 36 inches width guard. [2] Syntron Electric Vibrators, Model: V-20, Serial Number's: C-12708 and C-12935, electrical requirements: 115 V, 2.0 amps, 60 Hz. Baldor Industrial Motor, 1/2 horse power, 1725 rpm, 115-208/230 V, 60 Hz. Reliance Electric Tigear 150 Gear Reducer, 20 ratio, 86.25 rpm [final]. Inlets: [4] 1-1/2 inches diameter S-line fittings, [3] 6 inches diameter feed ports, [1] 8 inches diameter infeed [airlock]. Outlets: [2] 2 inches diameter S-line fittings. Overall dimensions: 39-1/2 inches length x 39-1/2 inches width x 60 inches height.
Stock No: fpe_HDBV072.4  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Fedco Stainless Steel Topping Applicator. Has two agitators with drives. Hopper/agitator assembles slide length wide on track. Hopper dimensions [inside] 12 inches W, 32 inches L, 18 inches height. [Curved bottom]. Has two on/off switches, on for each drive. Upper agitator switch runs straight to the motor. Lower agitator switch runs to Allen Bradley control drive, then to the motor. Control Drive: Bulleting 1333 Adjustable frequency AC Motor Drive. Allen Bradley, Cat No. 1333-AAB, Ser: B, Serial Number B17355, Input [3 phase] 460 volt, 50/60 Hz, 2.6 KVA, 3.3 amps. Output [3 phase]: 460 volt, 60 Hz, 1.7 KVA, 2.1 amps. Dimensions of frame: 38 inches W, 85-½ inches L, 35 inches height. Overall dimensions: 38 inches W, 85-½ inches L, 51-½ inches height.
Stock No: fpe_HDNP210C.6  |   Mfg: Fedco Engineering Systems  |   Model:   |   S/N: fpe_

Stock No: fpe_KAAM0231A  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Steel Feeder/Hopper – 145 cubic feet capacity, w/ approximately 15 feet stand. Equipped with: [1] motor driven slide gate, [1] model: R, Roto-Bin-Dicator® for level sensing. Dayton gear motor, 1/6 horse power, 40 rpm, 115 V, 4.9 amps, 60 Hz, single phase. Gear ratio: 42.7:1. Final rpm: 1. Torque: 225 in-pounds [1] 3 feet length x 1 feet 5 inches width top access door. Inlet: [1] 10 inches length x 10 inches width port, [1] 5 inches diameter port. Outlet: [1] 8 inches length x 8 inches width port. Overall dimensions: 5 feet 11 inches length x 5 feet 7 inches width x 15 feet 4 inches height. [BH].
Stock No: fpe_MRSP120  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Steel Feeder/Hopper – 145 cubic feet capacity, w/ approximately 15 feet stand. Equipped with: [1] pneumatic piston activated Plattco slidegate, model: UUS08852, [1] model: R, Roto-Bin-Dicator® for level sensing. [1] 3 feet 2 in length x 1 feet 9 inches width top access door. Inlet: [1] 10 inches length x 10 inches width port. Outlet: [1] 8 inches length x 8 inches width port. Overall dimensions: 5 feet 10 inches length x 5 feet 6 inches width x 15 feet 4 inches height. [H17].
Stock No: fpe_MRSP121  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Stock No: fpe_NOI1701  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Stainless Steel Feed Hopper-430 gallon. Inside straight wall dimensions: 48 inches length x 48 inches width x 52 inches height. Inlets: [1] 4 feet x 4 feet [hopper infeed]. Hydraulically Driven Rotary Pump is missing rotors and cover. Outlets: [1] 9-1/2 inches length x 6-1/2 inches port [bottom discharge]. Overall dimensions: 5 feet length x 4 feet 2 inches width x 6 feet height.
Stock No: fpe_RBFM1005.6  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Iron Holding Hopper. With screw conveyor, 25 feet length x 10 feet width x 7 feet deep for holding raw rendering product.
Stock No: fpe_RBFM675.9  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Dual APV Stainless Steel Feeding Hopper Tank with Pumps. Capacity: 360 gallons, dry. [2] APV R-Series positive displacement pumps, Model: R4RI, Inlets: 6 feet L. x 3 feet width. x 1 feet 6 inches height. [infeed hopper] Outlets: [2] 3-1/2 inches diameter NPT fittings. Inside-straight wall dimensions: 6 feet L. x 2 feet 11 inches width. x 3 feet 8 inches height. Overall dimensions: 6 feet 5 inches length x 3 feet 5 inches width x 4 feet 10 inches height.
Stock No: fpe_RBFM755.15  |   Mfg: APV  |   Model:   |   S/N: fpe_

Used [2] APV Stainless Steel Feeding Hopper Tank and Pump Package-360 gallons. Pump Model: R6R1. Serial Number: 20898. 2nd Pump Model: R4R. Serial Number: R-8734-048S. Inside straight wall dimensions: 6 feet length x 2 feet 11 inches width x 44 inches height. Inlets: [1] 6 feet x 2 feet 11 inches width [infeed hopper], [2] 9 inches length x 3 inches width. [pump inlets]. Outlets: [2] 1-1/2 inches diameter ACME fittings, [2] 3 inches diameter ACME fittings. Overall dimensions: 6 feet 3 inches length x 3 feet 2 inches width x 5 feet 2 inches height.
Stock No: fpe_RBFM823.20  |   Mfg: APV  |   Model:   |   S/N: fpe_

Stock No: fpe_SCJC218.3  |   Mfg: APV  |   Model: R3-RI  |   S/N: fpe_

Used Stainless Steel Hopper. Inlets: [1] 38-1/2 inches length x 18 inches width infeed. Outlet: [1] 15-1/2 inches length x 14 inches width discharge. Overall dimensions: 79 inches length x 79 inches width x 82-1/2 inches height.
Stock No: fpe_SELM197.3  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Stainless Steel Hopper / Feeder. Approximate capacity: 75 gallons. Crepaco Pump: 5 hp, 230/460V, 3 phase. Electrical control voltage requirement: 220V. Inlet / outlet – [2] 2 inch. Overall dimensions: 4 feet 8 inches L x 2 feet 10 inches W x 2 feet 3-1/2 inches H.(H17).
Stock No: fpe_SFPC030.8  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used 2003 AZO Stainless Steel Vibrating Hopper. Model: 1100. Type: 402580. Machine number: 043386A-1-023930-00. Feed hopper dimensions: 44 inches diameter x 18 inches height. Cone spreader: 34 inches diameter x 12 inches height. CE Vibrating Motor, Type: JV134-63, 1.07 horse power, 1730 rpm, 460 V, 1.65 amps, 60 Hz. Overall dimensions: 62 inches length x 50 inches width x 19 inches height.
Stock No: fpe_SGMI012.  |   Mfg: AZO  |   Model: 1100  |   S/N: fpe_

Used Pick Up Hopper with Stand-15 Gallon. Inlets: [1] 7 inches diameter flange with [8] 7/8 inches diameter Mounting holes at a center to center 4 inches adjacent and a center to center of 10-1/2 inches opposite. [1] 1-1/2 inches s-line input. Outlets: [4] 2 inches diameter S-line fittings. Overall dimensions: 2 feet 4-7/8 inches L. x 1 feet 10-1/2 inches width. x 3 feet 2 inches H.
Stock No: fpe_SGMI266.  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used 1996 K-Tron Soder Weigh Belt Mechanical Feeder. Approximate capacity: 5000 lbs/hr. Material of construction: stainless steel. Conveyor belt width: 10-1/2 inches. Leeson motor, 1/2 hp, 1750 rpm, 180 V, 2.5 amps. SM-Cyclo gear drive, chain driven, ratio: 29, final rpm: 60.3, torque: 870 in.-lb. The weigh belt feeder offers continuous and gravimetric feeding of bulk materials or can be used for batch feeding or the metering of a bulk material flow. Interface modules are available for installations with computer systems. Inlets [1] 14-1/2 inch diameter. Infeed hopper with an 8 inch adjustable open/close tray. Outlets: [1] 15 inch x 6 inch primary outlet, 15 inch x 3-1/4 inch secondary outlet, both with handle to select which outlet will be used. [1] 11 inch x 12-1/2 inch overflow outlet with tray to dispense substance or to allow to accumulate then dispense. Overall dimensions: 4 foot 5 inch L x 2 foot 6 inch W x 5 foot 9 inch H.[h11][ACN300].
Stock No: fpe_SMBV101.  |   Mfg: K-Tron Soder  |   Model: W300  |   S/N: fpe_

Used Pick-Up Hopper- 25 Gallon. 3-Leg support. Filtration capability. Inlets: [1] 10 inches diameter infeed port. Outlets: [1] 2-1/2 inches diameter discharge port. Overall dimensions: 34 inches length x 27 inches width x 51-1/2 inches height.
Stock No: fpe_SNPM138.a  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Pick-Up Hopper- 25 Gallon. 3-Leg support. Filtration capability. Inlets: [1] 10 inches diameter infeed port. Outlets: [1] 2-1/2 inches diameter discharge port. Overall dimensions: 34 inches length x 27 inches width x 51-1/2 inches height.
Stock No: fpe_SNPM139.a  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Pick-Up Hopper- 25 Gallon. 3-Leg support. Filtration capability. Inlets: [1] 10 inches diameter infeed port. Outlets: [1] 2-1/2 inches diameter discharge port. Overall dimensions: 34 inches length x 27 inches width x 51-1/2 inches height.
Stock No: fpe_SNPM140.a  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Stainless Steel Vacuum Hopper.
Stock No: fpe_SPPP706.2  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Stainless Steel Funnel Tank/Hopper Section. Inlets: [1] 4 inches width x 3 feet 8 inches L. [top infeed]. Outlets: [1] 4 inches width x 5 inches L. [bottom discharge]. Overall dimensions: 4 feet length x 1 feet 6 inches width x 5 feet 7 inches height.
Stock No: fpe_UGHB010.  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Don't see what you're looking for? Let us know what you need.
© 2012 food-processing-equipment.biz - All Rights Reserved.