Inventory Index  >  Size Reduction  >  Dicers / Slicers

Used Chisholm Ryder Bean Cutter. Model: PST542C. Serial Number: BST542C. Infeed hopper dimensions: 2 feet length x 1 feet 8 inches width. Drum dimensions: 2 feet diameter x 6 feet 11 inches L. Flight dimensions: 11-1/2 inches length x 11-1/2 inches width. Flight pitch: 2 inches [2] 6 feet 11 inches width x 2 feet 5 inches height access doors. Sterling Electric Motor, 3/4 horse power, 1730 rpm, 208-230/460 V, 2.27-2.20/1.10 amps, 60 Hz, 3 phase. Speedtronics Gear Drive, 25 ratio, 69.2 rpm [final]. Inlets: [1] 1 feet 3 inches diameter infeed. Outlets: [1] 1 feet 3 inches diameter discharge. Overall dimensions: 9 feet 9-1//2 inches length x 2 feet 10 inches width x 6 feet 2 inches height. FAD
Stock No: fpe_SFEP1322A.a  |   Mfg: Chisholm Ryder  |   Model: PST542C  |   S/N: fpe_BST542C

Used General Machinery Corporation Hydrauflaker Slicer. Model: FS-10-C. Serial Number: 499. Rotating cutting drum dimensions: 12 inches diameter x 29 inches L. Cutter dimensions: 4 inches length x 1-1/2 inches width. Maximum aperture/clearance: 33 inches length x 6 inches height. Teco-Westinghouse Motor, 7-1/2 horse power, 1755 rpm, 230/460 V, 24.9/12.4 amps, 60 Hz, 3 phase. Baldor Industrial Hydraulic Motor, 1-1/2 horse power, 1725 rpm, 208-230/460 V, 5.3-5/2.5 amps, 60 Hz, 3 phase. Inlets: [1] 33 inches length x 6 inches height. [infeed]. Outlet: [1] 29 inches length x 8 inches width. [product discharge]. Overall dimensions: 7 feet length x 3 feet 9 inches width x 6 feet height.
Stock No: fpe_EELD371.4a  |   Mfg: Genmac  |   Model: FS-10-C  |   S/N: fpe_499

Used Stainless Steel Slicer. Maximum aperture/clearance above belt: 1-1/2 inches width x 1/2 inches height. Height at conveyor inlet/outlet: 45-1/2 inches Infeed belt dimensions: 48 inches length x 1-1/2 inches width. Aligning belt dimensions: 17 inches length x 1 inches width. Cutting wheel diameter: 5-1/4 inches Product is guided downwards, through the discharge, by a 4-pronged placing wheel. Excess liquids accumulate in a 20 inches length x 4-1/2 inches width dish. Reliance Electric Motor, 3/4 horse power, 1725 rpm, 230/460 V, 4.6/2.3 amps, 60 Hz, 3 phase. Reeves Motor Drive, 6.1 ratio, 764 rpm [max], 76.4 rpm [min]. Inlets: 1/2 inches diameter threaded fitting. Outlets: 2 inches length x 2 inches width discharge chute. Overall dimensions: 55 inches length x 29 inches width x 56 inches height.
Stock No: fpe_3R-2018A.1  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Aloe Vera Leaf Cubing Machine. Makes 1 inches long x 1 inches wide cuts. Number of rotating blades: [6] 3 inches diameter Distance between blades: 1 inches Drum blade with [8] cutting knives: 3 inches diameter x 8-1/2 inches L. Distance between blades: 1 inches Maximum leaf width: 6 inches Infeed conveyor belt width: 6 inches width. Discharge conveyor belt width: 7 inches width. Dayton Electric Wash-Down Duty Motor, 1/2 horse power, 1725 rpm, 115/230 V, 9/4.5 amps, 60 Hz, single phase. Winsmith D-90 Drive, ratio of 15, 115 rpm [final]. Conveyor infeed/exit height: 36 inches Outlets: [1] 29 inches length x 12 inches width discharge chute. Overall dimensions: 6 feet 2 inches length x 2 feet 10 inches width x 4 feet 1 inches height. [GM].
Stock No: fpe_75.GALO2  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Aloe Vera Leaf Fillet Machine. Makes 1 inches wide cuts. Number of rotating blades: [6] 3 inches diameter Distance between blades: 1 inches Maximum leaf width: 6 inches Infeed conveyor belt width: 7 inches width. Discharge conveyor belt width: 7 inches width. Magnetek Electric Motor, 1/2 horse power, 1725 rpm, 115/208-230 V, 9/3.5-3.6 amps, 60 Hz, single phase. Dayton Drive, ratio of 15.1, 115 rpm [final]. Conveyor infeed/exit height: 36 inches Outlets: [1] 10 inches length x 12 inches width product discharge chute, [1] 33 inches length x 8 inches width bi-product discharge chute. Overall dimensions: 8 feet 4 inches length x 2 feet 4 inches width x 3 feet 8 inches height.
Stock No: fpe_75.GALO3  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Op’tRoot Pie Slicer. Belt width: 13 inches Plate diameter: 16 inches Power supply: 208 volts, 60 Hz, 3 phase. Mez Motor, 5 horse power, 1740 rpm, 208 V, 18.8 amps, 60 Hz. Conveyor infeed/exit height: 39 inches Overall dimensions: 99 inches length x 24 inches width x 87-1/2 inches height.
Stock No: fpe_ERCS002.  |   Mfg: Op’tRoot  |   Model:   |   S/N: fpe_

Used Stainless steel double roll buster, 16 in D x 18 in W, [1] rubber and [1] stainless steel rolls with geardrive.
Stock No: fpe_RW-913.4  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Slabber. Aperture/clearance: 1 feet 2 inches width x 3-5/8 inches height. Conveyor belt dimensions: 10 inches width x 4 feet 2 inches L. Infeed/exit height: 3 feet 5 inches This machine will make slabs of a block of meat, cheese, or other bulk block item. Minimum slab thickness: ˝ inches Maximum slab thickness: 1-3/4 inches Emerson Motor, 1/2 horse power, 1725 rpm, 115/230 V, 9.2/4.6 amps, 60 Hz, 3 phase, [blade drive]. Baldor electric motor, ˝ horse power, 1725 rpm, 115/230 V, 7.4/3.7 amps, 60 Hz, 3 phase, [conveyor drive]. Gear reducer ratio: 20, 86 rpm [final]. Overall dimensions: 4 feet 4 inches length x 2 feet 10 inches width x 4 feet 8 inches height. [GM].
Stock No: fpe_SMBS243.1  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Don't see what you're looking for? Let us know what you need.
© 2012 food-processing-equipment.biz - All Rights Reserved.